As an Amazon Associate I earn from qualifying purchases.
1. Readytosky #ad
Readytosky Pixhawk PX4 Flight Controller PIX 2.4.8 32 Bit Flight Control Board+Safety Switch+Buzzer+I2C Splitter Expand Module+16GB SD Card #adReadytosky #ad
- We have m8n gps for the pixhawk flight controller, ASIN : B01KK9A8QG. And the 3dr radio telemetry kit for this flight controller, ASIN: B01DHV4DVA.
The advanced 32-bit arm cortexm4 high-performance processors, can run NuttX RTOS real-time operating system;. Please do not use Qground but use Mission planner.
2. Radiolink #ad
Radiolink PIXHAWK Flight Controller FPV RC Drone FC 32 Bit with Power Module for Long-wheelbase Quadcopter/6-8 Axis Multirotor #adRadiolink #ad
- Easier setting--no complicated setup for beginner and professor player, easy to operation calibration settings on Mission PlannerNormally setting same as the APM PIXHAWK, flash firmware please download Radiolink's Mission Planner.
Stabilization--producing by automatic and unique automation software testing, it achieved interference less from inner components, built-in barometer sensor to make altitude hold stabilization. A powerful hardware device can create, you can implement more functions as you want by simple programming.
Multiple function--support osd and GPS module and more, suit for long-wheelbase quadcopter and 6-8 axis multirotor. High-end configuration--advanced 32f427 arm cortex M4 Core high-performance processor, 32bit fail-safe co-processor, MPU 6000 3-axis accelerometer. Excellent performance--new layout and technical upgrade base on 3DR PIX.
|Warranty||Manufacturer warranty for 1 year from date of purchase|
3. Hobbypower #ad
Hobbypower DIY S550 Hexacopter PX4 Pixhawk Flight Controller 7M GPS PPM 30A ESC 2212 #adHobbypower #ad
- This action is a diy s550 hexacopter kit, it is unassembled. This s550 hexacopter is a very popular machine, beautiful appearance, and a stable system for smooth flight, it has a strong rack, it is very good for fly and FPV.
Come with high quality electronic accessories, only need a 3S Lipo battery and a 6CH above radio system to complete.
4. Radiolink #ad
Radiolink Mini PIX Flight Controller FC for FPV Racing Drone/Helicopter/Fixed Wing #adRadiolink #ad
- Digital filter algorithm--radiolink mini pix flight controller design by digital filter algorithm for damped vibration, the drone still have a good performance even though without physical vibration dampener. Stabilization--the shell to reduce interference of airflow during flying, air pressure vent to ensure the accuracy of barometer measurement, built-in barometer sensor to make altitude hold stabilization.
It is a good choice to have a top configuration with reasonable price.
Easier setting--do not need complicated setting for beginner and professor player, connect Radiolink Mission Planner to adjust the PID's to reach your perfect settings.
Normally setting same as the APM pix, flash firmware please download Radiolink's Mission Planner. Only 1. 54*1. 54*057in, suitable for mini racing drone, fixed wing, multirotor and rc car etc. Mini size as f4--new layout from pixhawk, helicopter, integrating the full functions and setting same as PIXHAWK. Top firmware version--with stm32f405vgt6 processor and LPS22HB barometer.
5. Readytosky #ad
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller #adReadytosky #ad
- A new generation m8n GPS, with low power consumption and high precision. Attention: the gps can only use in Pixhawk and APM Flight controller, it can't work with other flight controller.
Special designed for pixhawk 2. 4. 6 2. 4. 8 flight controller, asIN:B07CHQ7SZ4. Note:if you use it to aPM Flight Controller, Please replace the connect by yourself.
The ultimate accuracy is 06 meters, actually almost 09 meters, greater than the previous generation NEO-7N 1. 4-1. 6 meters accuracy. The gps light only can light up when it search the satellite signal outdoor; ROM already been fix, it cannot be flash and change.
6. Hobbypower #ad
Hobbypower Pixhawk PX4 Flight Controller W/Shock Absorber +M8N GPS 915Mhz Radio Wireless Telemetry Set OSD Module PPM Module I2C Splitter Expand Module Power Module for FPV Quadcopter Multirotor #adHobbypower #ad
- Bus interface uart, spi, I2C, CAN. Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control.
Provide automatic and manual mode. Provide redundant power input and fault transfer function. Advanced 32 bit cortexm4 arm high performance processor, can run RTOS NuttX real time operating system.
7. Hobbypower #ad
Hobbypower Pixhawk PX4 Flight Controller with Shock Absorber + 7M GPS 915Mhz Radio Wireless Telemetry OSD Module PPM Module RGB LED I2C Splitter Expand Power Module #adHobbypower #ad
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control. Provide redundant power input and fault transfer function.
Advanced 32 bit cortexm4 arm high performance processor, can run RTOS NuttX real time operating system. Provide automatic and manual mode. Bus interface uart, i2c, SPI, CAN.
8. Hobbypower #ad
Hobbypower Power Module V1.0 for Pixhawk Apm2.5 Apm2.6 Ardupilot Mega Flight Controller #adHobbypower #ad
- Newest version, have soldered already, ready to work! Top quality and 100% brand new. Input voltage: 6~28V support 30V. Voltage and current measurement configured for 5V ADC. Max current sensing: 90A.
9. HobbySoar #ad
HobbySoar Power Module Output BEC 3A with XT60 Plug for APM2.5 APM2.6 APM2.8 APM Pixhawk Flight Controller #adHobbySoar #ad
- Pls do not use this to power the servo. Otherwise, rc receiver and APM accessories GPS, it will seriously affect the reliability of the flight control equipment. If the kit is equipped with a servo, due to the large current of servo system, please use the BEC to power the servo system.
Note: the power module is only designed to flight controller, 3dr radio. For sale is power module which is compatible with APM2. 5/2. 6, have soldered already, Pixhawk Flight controller, ready to work!.
Input voltage: 6~28v, max current sensing: 90A. The apm power module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pin cable. The power module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection. It is not designed to power servos.