As an Amazon Associate I earn from qualifying purchases.







1. RPM
#ad
RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
#adRPM #ad - The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle. For the traxxas slash 4x4 and Stampede Front or Rear A-arms. Tech notes: two packages will be needed to complete one truck.More information #ad
Backed by rpM's world-renowned breakage warranty. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! .Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 0.39 Inches |
Length | 4.1 Inches |
Weight | 0.06 Pounds |
Width | 4 Inches |
Part Number | 80702 |
Model | RPM80702 |
Warranty | Please refer to manufactuer warranty. If there are manufacture defects or any quality issues upon receiving your products, please contact us immediately. To return items, please keep the item condition new. |
More information #ad
2. RPM
#ad
RPM 80705 Front/Rear A-Arms Blue Slash/Stampede 4x4 Blue
#adRPM #ad - Tech notes: two packages will be needed to complete one truck. Backed by rpM's world-renowned breakage warranty. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.More information #ad
For the traxxas slash 4x4 and Stampede Front or Rear A-arms. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 0.42 Inches |
Length | 4 Inches |
Weight | 0.05 Pounds |
Width | 4 Inches |
Part Number | 80705 |
Model | RPM80705 |
Warranty | Please refer to manufactuer warranty. If there are manufacture defects or any quality issues upon receiving your products, please contact us immediately. To return items, please keep the item condition new. |
More information #ad
3. Generic
#ad
Green, RPM Front & Rear Suspension Arms for Traxxas Stampede Slash Rustler Hoss 4x4
#adGeneric #ad - Replaces stock ttraxxas 3655R & 3655X. A-arms will not fit ST versions of the Rally. Fit the following vehicles:1/10 Slash Stampede Rustler Rally Hoss 4x4. Made in USA.More information #ad
Brand | Generic #ad |
Manufacturer | BOBBYRC_RC #ad |
Part Number | 80704_2 |
More information #ad
4. RPM
#ad
RPM 2 Pack 80705 Front Rear Blue A-Arms /Fits Traxxas 4x4 Slash Stampede & Rally 4wd VXL
#adRPM #ad - Made in USA. These will fit the following traxxas vehicles: 1/10 slash 4x4, 1/10 vxl stampede 4x4, 1/10 Platinum Slash 4x4, 1/10 Ultimate Slash 4x4, 1/10 lcg slash 4x4, and 1/10 Rally 4x4.More information #ad
Brand | RPM #ad |
Manufacturer | RPM #ad |
Part Number | 2 80705 |
More information #ad
5. RPM
#ad
RPM 80709 Traxxas Slash 4x4, Stampede 4x4 and Rally Front Or Rear A-Arms-Red
#adRPM #ad - Replaces stock Traxxas #3655x. Direct oem parts for a guaranteed fit and finish. Made from high quality materials and designed for long lasting performance. For use with savox SB2263MG-CE.More information #ad
Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 33 Inches |
Length | 3.3 Inches |
Weight | 0.5 Pounds |
Width | 0.55 Inches |
Part Number | RPM80709 |
Model | RPM80709 |
Warranty | No Warranty |
More information #ad
6. RPM
#ad
RPM Nerf Bars Slash and Slash 4x4, Black
#adRPM #ad - Proudly made in the USA. Replaces weaker stock components. Designed to increase durability. Rpm nerf bars are only tested and guaranteed to fit the stock Traxxas Slash 2wd and Slash 4x4 chassis.More information #ad
Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 0.75 Inches |
Length | 6.5 Inches |
Weight | 0.05 Pounds |
Width | 3 Inches |
Part Number | 80622 |
Model | RPM80622 |
Warranty | Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm |
More information #ad
7. RPMPRODUCT
#ad
4 Pack Slash 4X4 RPM 80702 80732 73592 Front Rear A-Arms Caster Blocks Bearing Carriers 4x4 Slash Stampede rustler
#adRPMPRODUCT #ad - These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks. Fit- slash stampede Rustler Hoss 4x4.More information #ad
The arms upper hinge pin hole of the rear axle carriers cannot be used not a stock location for the Slash 4x4 due to strengthening designs that reduce the clearance around the rear axle.Brand | RPMPRODUCT #ad |
Manufacturer | RPMPRODUCT #ad |
Part Number | 80702 80732 73592 |
More information #ad
8. RPM
#ad
RPM Front or Rear A-Arms for Traxxas Slash and Rally, Green
#adRPM #ad - Replaces weaker stock components. Proudly made in the USA. Rpm a-arms for the traxxas 1/10th scale rally 4wd, slash 4x4 & Stampede 4x4 are sold in sets of 1 – left and 1 – right A-arm in each package. Designed to increase durability.More information #ad
Brand | RPM #ad |
Manufacturer | HRP Distribution #ad |
Height | 0.38 Inches |
Length | 6.25 Inches |
Weight | 0.02 Pounds |
Width | 4 Inches |
Part Number | 80704 |
Model | RPM80704 |
Warranty | Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm |
More information #ad