As an Amazon Associate I earn from qualifying purchases.
1. HAKRC #ad
Hakrc 20x20mm 15A Blheli_S BB2 2-4S Dshot 4 in 1 ESC for RC FPV Racing Drone #adHAKRC #ad
- The code supports features to prevent sync loss. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
All codes use damped light mode. The code supports regular 1-2ms pulse width input, as well as Oneshot125 125-250us, Oneshot42 41. 7-83. 3us and multishot 5-25us and D-shot. There are tune-able parameters that can make the code run well even in the most demanding situations, although default settings will work.
The input signal is automatically detected by the ESC upon power up. Blheli_s is designed for superior performance in FPV Racing, and uses hardware generated motor pwm for smooth throttle response and silent operation.
2. YIJIA BINGRU-HAT #ad
YIJIABINGRU FD435 Stack FD F4 Mini Flight Controller 35A Blheli_32 3-6S 4 in 1 ESC 20x20mm Replacement Parts #adYIJIA BINGRU-HAT #ad
- Drone replacement spare parts. Item name: fD435 Stack. Usage: for 120mm-250mm Frame Kit. Weight: 18. 4g.
3. Hobbywing #ad
Hobbywing Xrotor Micro 4in1 ESC 60A-6S-BLHeli32-DS1200 #adHobbywing #ad
- Lipo power input: 3s-6s cont. Current: 60ax4 burst current: 80Ax4 BEC Output: [email protected]
05a. Input wires: 12awg-130mm* Red/Black. High-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.
Output wire: No wires but solder tabs. Blheli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
4. FPVDrone #ad
FPVDrone 5A ESC Brushed Speed Controller Dual Way Bidirectional ESC 2S-3S Lipo for RC Model Boat/Tank 130 180 Brushed Motor Spare Parts4PCS #adFPVDrone #ad
- The strong resistant current capability, excellent heat dissipation. Multiple protections: Throttle signal loss protection/Out of control. Dual-way 5a brushed eSC support 2S-3S Lipo. Suitable for 1/35 rc model cars, tanks, 4WD RC cars. Small size with built-in capacitor module.
5. iFlight #ad
IFlight SucceX-E Mini 35A BLHeli_S 4-in-1 ESC 2-6s Electronic Speed Controller Support DSHOT600 for RC Quadcopter Drone #adiFlight #ad
- Rational layout design with extended solder pads ensures easy builds, fixes or adjustments. Standard 20*20mm/Φ3mm mounting holes; Vibration and shocks can be perfectly avoided by adding dampers.
6s esc support dshot up to 600; support 2-6S Lipo Input. 35a per channel, 40A burst. The design of succex-e 35a blheli_s dshot600 4in1 esc based on SucceX ESC, was designed to give your motors smooth power with great stability and durability, more affordable.
6. iFlight #ad
IFlight SucceX Mini 45A 2-6S ESC 20x20mm BLHeli_32 DShot150/300/600 4-in-1 Electronic Speed Controller for FPV Drone Racing Part #adiFlight #ad
- Supports dshot150/300/600/MultiShot/OneShot etc. Mounting holes: 20*20mm φ3mm with Grommets φ2mm. 6 layers single-board stacking PCB board, 4x STM32G071 MCU processers. 2-6s lipo battery compatible, 45A per channel, 55A burst. 48mhz runs blheli 32. X firmware, Onboard current sensor.
7. AKK #ad
AKK 35A 8 Bit 4 in 1 20mm x 20mm Brushless ESC Integrated for RC Drone FPV Racing #adAKK #ad
- Main control chip:STM32F051. Supports 2-6S Lipo input. Dshot600 readydefault support pwm/oneshot42 ;125/muLTISHOT/DSHOT150;300 Highly integrated, small size, Built-in ammeter.
The input and output cables are made of soft silicone cables, which are very durable, resistant to high temperatures and easy to solder.
8. iFlight #ad
IFlight SucceX 50A 2-6s ESC 32bit BLHeli 32 4-in-1 ESC with Telemetry Pad Built in Current Sensor DSHOT1200 for FPV Racing Drone Quadcopter #adiFlight #ad
- The stm32f051 is combined with high-performance 3-in-1 driver, 4oz 1. 6mm thick power board09mm copper ratio, outbreak faster speed; with 6-layer PCB board, better operating load capacity.
Succex 50a 32bit bl dshot1200 4in1 esc was designed to give your motors smooth power with great stability and durability. Standard 305*305 Φ3mm mounting holes; vibration and shocks can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy builds, fixes or adjustments.
Tdk mlcc low esr ceramic capacitors and ntmfs5C430NL MOSFET that provides high efficiency and better heat dissipation. 6s esc support dshot up to 1200, support: dshot150/300/600/1200, MultiShot, OneShot; support 2-6S Lipo Input.