TEMCo WC0340-20′ 10′ Blk, 10′ Red 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA

#ad
TEMCo #ad - 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Highly flexible stranded No. Rohs Compliant. Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts. In addition to welding applications, solar & battery installations, battery banks and any other use that requires rugged, RV & inverter wiring, welding cable can also be used in car audio & golf cart wiring, highly flexible cable.

TEMCo WC0340-20' 10' Blk, 10' Red 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA #ad - Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll. Temco easy-flex has a rugged epdM jacket and is highly flexible. A paper separator is utilized to enchange stripability. Resistant to cuts, oil, Tears, water, Abrasion, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards.

. Minimum temperature rating -50°C. 30 bare copper conductor insulated with high grade EPDM. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought.

#ad



SELTERM 10 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Lugs are suitable for use with Welding Cables and Battery Cables. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ul tested & Approved. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

SELTERM 10 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty construction for Enhanced High Temperature Durability. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

Can be Crimped or Soldered.

#ad



TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black

#ad
TEMCo ST0310 #ad - Upon cooling, non-drying, forming a permanent, the adhesive solidifies, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Diameter: 3/4". Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.

. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Heavy duty construction for Enhanced High Temperature Durability. Ul tested & Approved. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

#ad



TEMCo Hammer Lug Crimper Tool 5 Year Warranty

#ad
TEMCo TH0007 #ad - Ul tested & Approved. Diameter: 3/4". Can be Crimped or Soldered. Place stripped wire in terminal. Using the force method above will guarantee perfect crimps every time. Terminal Type: Uninsulated. Wire gauge: 8 awg, 2/0, 1 awg, 1/0, 4 awg, 2 awg, 6 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty.

1 year warranty. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Also works well in a shop vise. Crimping type: Indent. Step 2 with crimper on solid surface, strike crimp ram with hammer 1-2 times. Heavy duty construction for Enhanced High Temperature Durability. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty #ad - Manual hammer crimper: recommend 2-4 lb sledge hammer. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Once the terminal completely envelopes the wire, the crimper will not move and when struck will feel "solid".

Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

#ad



SELTERM 10 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Corrosion free Ideal for Marine Automotive or Outdoor Use. Heavy duty construction for Enhanced High Temperature Durability. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Close end pad seals Out Moisture Keeping Cables Dry. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product.

SELTERM 10 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. Terminal Type: Uninsulated. Wire gauge: 8 awg, 1/0, 4 awg, 1 awg, 2 awg, 6 awg, 2/0, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Made from 100% annealed Tinned Copper for Max Current Flow.

#ad



Blue Sea Systems e-Series On/Off Battery Switch

#ad
Acr Electronics 915 #ad - Also works well in a shop vise. Crimping type: Indent. Corrosion free Ideal for Marine Automotive or Outdoor Use. Heavy duty construction for Enhanced High Temperature Durability. Continuous rating: 350A, Maximum voltage: 48V DC. Can be Crimped or Soldered. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

Terminal Type: Uninsulated. Wire gauge: 8 awg, 1/0, 2/0, 4 awg, 1 awg, 2 awg, 6 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Made from 100% annealed Tinned Copper for Max Current Flow. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more.

Blue Sea Systems e-Series On/Off Battery Switch #ad - Manual hammer crimper: recommend 2-4 lb sledge hammer. Ignition protected-safe for installation aboard gasoline powered boats. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Switches a single battery to a single load group. Close end pad seals Out Moisture Keeping Cables Dry.

#ad



4/0 0000 Gauge 120 mm² Capacity 12 in. Handles Electrical Tool 5 YEAR WARRANTY - TEMCo Wire and Cable Cutter

#ad
TEMCo Industrial TH0001 #ad - Terminal stud size: 3/8" - 16. Wear eye protection during use. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Ul tested & Approved. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ul tested & Approved. Corrosion free Ideal for Marine Automotive or Outdoor Use. Do not cut steel. For use with battery and welding cable, building wire, SO Cord, and more.

4/0 0000 Gauge 120 mm² Capacity 12 in. Handles Electrical Tool 5 YEAR WARRANTY - TEMCo Wire and Cable Cutter #ad - Do not use on live conductors. The temco th0001 wire & cable cutter can cut wire up to 4/0 0000 AWG. For use with Copper & Aluminum electrical wire only. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Can be Crimped or Soldered. Continuous rating: 350A, Maximum voltage: 48V DC. Can be Crimped or Soldered. 12" steel handles with Rubber Grips. Effortlessly cuts Copper & Aluminum Cables up to 4/0 gauge. Perfect for battery & welder Cables, Building Wiring, SO Cord and more.

#ad



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

#ad
Young4us 43237-2 #ad - Single circuit on-off. Non-generic. Can be Crimped or Soldered. 12" steel handles with Rubber Grips. Effortlessly cuts Copper & Aluminum Cables up to 4/0 gauge. Perfect for battery & welder Cables, Building Wiring, SO Cord and more. 5 year warranty from a well-known American name. Ip66 waterproof, iso 8846 and meets ABYC requirements.

1 year warranty. Forged, precision ground shear Action Blades. The tubes have the advantages of good insulativity, metal pipeline and electrical wire and cable, excellent corrosion resistance and abrasion performance, which can be widely used in wiring, water proofing, seal, corrosion prevention and insulation protection for electronic component, etc.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft #ad - Switches a single battery to a single load group. Material: polyolefin. Terminal stud size: 3/8" - 16. Close end pad seals Out Moisture Keeping Cables Dry. These tubes are suitable for bundling, electrical insulation, mechanical protection and wire joints etc. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1.

22m4ft. Ignition protected-safe for installation aboard gasoline powered boats.

#ad



TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED

#ad
TEMCo ST0440 #ad - Ip66 waterproof, iso 8846 and meets ABYC requirements. Material: polyolefin. Non-generic. Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty construction for Enhanced High Temperature Durability. 1 year warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Single circuit on-off. Can be Crimped or Soldered.

The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Ignition protected-safe for installation aboard gasoline powered boats. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Can be Crimped or Soldered. Color: black, material: Polyethylene, Shrink Ratio: 3:1.

TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED #ad - For use with Copper & Aluminum electrical wire only. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Manual hammer crimper: recommend 2-4 lb sledge hammer.

#ad



TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED

#ad
TEMCo ST0430 #ad - Ip66 waterproof, iso 8846 and meets ABYC requirements. Non-generic. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED #ad - Can be Crimped or Soldered. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Diameter: 3/4". Ul tested & Approved. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier.

1 year warranty. Can be Crimped or Soldered. Forged, precision ground shear Action Blades. Heavy duty construction for Enhanced High Temperature Durability. 1 year warranty. Material: polyolefin.

#ad



Blue Sea Systems Class T JJN Fuse 400 AMP

#ad
Acr Electronics 5121 #ad - Ul tested & Approved. Continuous rating: 350A, Maximum voltage: 48V DC. Terminal Type: Uninsulated. Wire gauge: 8 awg, 2/0, 1 awg, 6 awg, 2 awg, 1/0, 4 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Made from 100% annealed Tinned Copper for Max Current Flow.

Color: red, material: Polyethylene, Shrink Ratio: 3:1. Switches a single battery to a single load group. Ip66 waterproof, iso 8846 and meets ABYC requirements. Can be Crimped or Soldered. Material: polyolefin. Close end pad seals Out Moisture Keeping Cables Dry. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

Blue Sea Systems Class T JJN Fuse 400 AMP #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 1". Corrosion free Ideal for Marine Automotive or Outdoor Use. 2. 75" l x 1. 31" dia.

#ad