SeaSense Toggle Boot

#ad
3M 50031200 #ad - Limited lifetime Warranty 3/4" x 1". Brass threads resist corrosion. Protects against moisture and dirt. Our seasense toggle switch Boot fits standard toggle switches with a 7/16" thread.

#ad



Blue Sea Systems WeatherDeck SPST/On-Off Toggle Switch

#ad
Blue Sea Systems 4150-BSS #ad - Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC.

Specially manufactured by carling technologies for use in blue Sea Systems" WeatherDeck Panels When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporay immersion for 30 min Nickel-plated brass and phenolic non-corrosive construction.

#ad



Shoreline Marine Toggle Switch On/Off Black

#ad
Big Game International SL52106 #ad - When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Durable plastic construction. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC. Easy to install. Easy to install toggle switch is perfect for lights or aerators. Perfect for lights or aerators. Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels.

Nickel-plated brass and phenolic non-corrosive construction.

#ad



SEACHOICE 12021 3- Position Toggle Switch On/Off/On

#ad
Seachoice 12021 #ad - Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC. 3-position ideal for running and/or anchor lights, wipers, manual/auto bilge pumps. Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Terminals: 6. Sealed to resist water penetration. Max panel thickness: 1/4 inch.

SEACHOICE 12021 3- Position Toggle Switch On/Off/On #ad - . Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. Rated 15a @ 12v dc, 10a @ 24V DC. Requires 15/32" mounting hole. Perfect for lights or aerators. Three-position on/off/on toggle switch. 2-position ideal for starter, horn, or choke. Fits panel through 1/4". Black plastic paddle and locking ring with lever seal and knurled cap nut.

Nickel-plated brass and phenolic non-corrosive construction. The product is manufactured in United States. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Easy to install. Durable plastic construction.

#ad



Gardner Bender GSW-20 Electrical Toggle Switch Covers, EDPM Rubber Cover, Moisture, Dust and Dirt Resistant, Pack of 2, Black

#ad
Gardner Bender GSW-20 #ad - Gardner bender™ has a versatile Toggle Switch Family With Multiple Position Configurations. Tough edpm rubber covers to protect switches from moisture, dust and dirt. Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes.

Easy to install. Perfect for lights or aerators. Durable plastic construction. Max panel thickness: 1/4 inch. Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Terminals: 6. Three-position on/off/on toggle switch. Built-in hex nut base screws onto all GB toggle switches.

Gardner Bender GSW-20 Electrical Toggle Switch Covers, EDPM Rubber Cover, Moisture, Dust and Dirt Resistant, Pack of 2, Black #ad - . Fits most toggle switches. Flat terminal heavy duty toggle switches meet the Standards Of Today'S Automotive, Marine And Industrial Applications, And Are Great For Electrical Connections. Toggle switches feature flat terminals And Are Available In Four Different Actuations; Spst, Spdt, Dpst And Dpdt. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC.

Nickel-plated brass and phenolic non-corrosive construction.

#ad



Blue Sea Systems Panel Mount AGC/MDL Fuse Holder

#ad
Blue Sea Systems 5021-BSS #ad - Fits most toggle switches. Max panel thickness: 1/4 inch. Replaces fuse holder found in contura Waterproof Fuse Panels Easy to open Withstands water exposures normally encountered in above deck applications: salt spray, rain, wash-downs. Perfect for lights or aerators. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes.

Blue Sea Systems Panel Mount AGC/MDL Fuse Holder #ad - Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Terminals: 6. Easy to open. Easy to install. Durable plastic construction. Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. Withstands water exposures normally encountered in above deck applications: salt spray, rain, wash-downs.

Nickel-plated brass and phenolic non-corrosive construction. Built-in hex nut base screws onto all GB toggle switches. Replaces fuse holder found in Contra Waterproof Fuse Panels. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC. Three-position on/off/on toggle switch.

#ad



GAMA Electronics 30 Amp Toggle Switch 3 Position Polarity Reversing DC Motor Control- Momentary

#ad
GAMA Electronics, Inc. 28PR-MOM #ad - Easy to open. Fits most toggle switches. Replaces fuse holder found in Contra Waterproof Fuse Panels. This heavy duty switch mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. Suitable for operating running and anchor lights, blowers, bilge pumps, baitwell pumps and more. Terminals: 6. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction.

Tough edpm rubber covers to protect switches from moisture, dust and dirt. Nickel-plated brass and phenolic non-corrosive construction. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Three-position on/off/on toggle switch. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC.

GAMA Electronics 30 Amp Toggle Switch 3 Position Polarity Reversing DC Motor Control- Momentary #ad - Withstands water exposures normally encountered in above deck applications: salt spray, rain, wash-downs. It comes with built-In jumper bars for polarity reversing. Max panel thickness: 1/4 inch. Perfect for lights or aerators. Built-in hex nut base screws onto all GB toggle switches.

#ad



Blue Sea Systems Push Button Reset Only Circuit Breaker Boot - Black

#ad
Blue Sea Systems 4137-BSS #ad - Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC. Withstands water exposures normally encountered in above deck applications: salt spray, rain, wash-downs. Tough edpm rubber covers to protect switches from moisture, dust and dirt. Fits most toggle switches. Nickel-plated brass and phenolic non-corrosive construction.

Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Terminals: 6. Max panel thickness: 1/4 inch. Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. Uv resistant material resists discoloration and cracking. Easy to open.

Blue Sea Systems Push Button Reset Only Circuit Breaker Boot - Black #ad - Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only UV resistant material resists discoloration and cracking Two per retail package. Easy to install. Built-in hex nut base screws onto all GB toggle switches. Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only.

Three-position on/off/on toggle switch. Replaces fuse holder found in Contra Waterproof Fuse Panels.

#ad



Shoreline Marine Toggle Switch On/Off Brass

#ad
Big Game International SL52107 #ad - Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC. Chrome Plated Brass Toggle. 15 amps 12 vdc, 10 amps 24 VDC. Durable plastic construction. Fits panels up to 1/4 inch thick. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction.

Shoreline Marine Toggle Switch On/Off Brass #ad - Simple Installation. Max panel thickness: 1/4 inch. Two per retail package. Great for lights, aerators and blowers. Built-in hex nut base screws onto all GB toggle switches. Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only. Fits most toggle switches. Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.

Terminals: 6. Clearly labeled on/off toggle switch features brass design that easily connects to a 12 V power source Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. Easy to open. Uv resistant material resists discoloration and cracking.

#ad



GAMA Electronics 30 Amp Toggle Switch 3 Position Reverse Polarity DC Motor Control- Maintained

#ad
GAMA Electronics, Inc. #ad - When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. Chrome Plated Brass Toggle. 15 amps 12 vdc, 10 amps 24 VDC. Great for lights, aerators and blowers. Fits most toggle switches. Durable plastic construction. Replaces fuse holder found in Contra Waterproof Fuse Panels.

GAMA Electronics 30 Amp Toggle Switch 3 Position Reverse Polarity DC Motor Control- Maintained #ad - Uv resistant material resists discoloration and cracking. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. Fits panels up to 1/4 inch thick. Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeckâ Panels. Maximum amperage: 15a @ 125v ac / 15a @12v dc / 10A @ 250V AC.

Perfect for lights or aerators. Built-in hex nut base screws onto all GB toggle switches. Tough edpm rubber covers to protect switches from moisture, dust and dirt. Two per retail package. Easy to open. It comes with built-In jumper bars for polarity reversing. Simple Installation.

#ad



Ancor 108802 Marine Grade Electrical Primary Tinned Copper Boat Wiring 10-Gauge, Red, 25-Feet

#ad
Ancor Marine Grade Products 108802 #ad - 15 amps 12 vdc, 10 amps 24 VDC. Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Terminals: 6. Great for lights, aerators and blowers. Fits panels up to 1/4 inch thick. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Chrome Plated Brass Toggle. When mounted with a weatherdeckâ Toggle Switch Boot Rated IP67-temporay immersion for 30 minutes. 25 feet of red 10 AWG marine grade wire. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Fits most toggle switches. Built-in hex nut base screws onto all GB toggle switches.

Ancor 108802 Marine Grade Electrical Primary Tinned Copper Boat Wiring 10-Gauge, Red, 25-Feet #ad - . Durable plastic construction. Nickel-plated brass and phenolic non-corrosive construction. Withstands water exposures normally encountered in above deck applications: salt spray, rain, wash-downs. Tough edpm rubber covers to protect switches from moisture, dust and dirt. Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only.

They are constructed with premium vinyl insulation that is rated at 600 volts, heat, battery acid, 105 deg C dry and 75 deg C wet, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, abrasion and ultra-violet radiation.

#ad